Condex Energy Systems - Condensing Heat Recovery



By heating cold process liquids with hot exhaust gases, the ConDex system recovers both sensible and latent heat energy. When incoming cold fluid enters the ConDex exchanger and the hot exhaust gases pass through the proprietary ConDex exhanger unit, so much energy is exchanged that the gases are cooled beyond the point where the water vapor condenses out of the exhaust gas, releasing and recovering the heat it took to vaporize the water initially. This phase change from vapor to liquid recovers 980 Btu's of energy for very pound of water condensed.
ConDex is not only more effective than competing systems, it also costs less to operate and maintain. By recovering such significant amounts of heat from an exhaust gas that it is cooled below its dew point, a dramatic increase in fuel savings is achieved.
Example : 80'F exit flue gas temperature results in 22% fuel savings.
ConDex maximizes water condensation and the resulting recovery of latent heat. This key advantage is achieved in two ways: special metallurgy with high heat transfer capabilities and the addition of fins to dramatically increase the heat transfer surface area.